Olympus BondMaster 1000+ Ultrasonic Bond Tester
The BondMaster 1000+ is a versatile, full multi-mode Ultrasonic Bond Tester with Resonance, MIA, Pitch/Catch mode and new RF display mode. This offers rental users the ability to select the method best suited to inspect the wide variety of composite materials used. Its high performance, lightweight, and rugged durability make it the NDT hire choice for applications in the manufacturing, maintenance and repair of composite structures.
Features:
Alarm outputs
Customer interchangeable displays: - Hi-Brite Electroluminescent - Monochrome Liquid Crystal - Color Liquid Crystal
Full Multi-Mode Capability: - Pitch / Catch (Swept Impulse RF) - Resonance - MIA - Mechanical Impedance Analysis
Lightweight less than 4lbs. (1.8 Kg)
PowerLinkTM Technology - automatic probe recognition and instrument set-up
Program storage
RS-232 output for printer or computer interface
Single Li-Ion battery
Trace storage
VGA Output
Battery Operating Time: | 6 to 8 hours |
Power Requirements: | 85 to 240 volts 50 to 60 Hz mains. External holder charges batteries outside the instrument. Charging time is typically 4 hours. |
Languages | English Spanish French or German |
Analog Output Update: | Rate continuous in MIA and resonance modes. Data available at repetition rate in all pitch/ catch modes |
Operating Temperature | -4 to 140 degrees F |
Frequency Range | 250 Hz to 1.5 MHz |
Gain | -10 to 50.0 dB |
Test Methods | The modes of operation are Pitch / Catch (Swept Impulse RF) Resonance and MIA |
Pitch/Catch Swept: | Measures amplitude and phase changes using a swept frequency method to detect disbonds. Requires no couplant. |
Pitch/Catch Impulse: | Measures amplitude and phase changes using a short burst of energy to detect disbonds. Displays information in envelope or vector display fo |
Pitch/Catch RF Impulse: | Measures amplitude and phase changes using a short burst of energy to detect disbonds. Displays information in envelope or vector display fo |
Resonance: | Detects disbonds by changes in phase and amplitude of probe resonance. Requires couplant. |
Mechanical Impedance Analysis (MIA): | Measures the stiffness and mass of the material under test. The output is measured in both amplitude and phase. Requires no couplant. |
Alarm Logic | Positive or negative alarm gate |
Alarm Output | 0 V to +3 V HC logic output switchable audible alarm and front panel annunciator alarm indicator on probe is standard. |
Clock/Calendar | Time and date are stored and printed with each waveform. |
Screen storage | Up to 20 screens can be stored. |
Program storage | Up to 100 instrument setups |
Probe connector | 11-pin Fisher |
Analog outputs | Signals: +/- 5 volt adjustable offset not affected by position controls or ZOOM function. |
RS-232 Interface | Screen printout and computer interface. Baud rate is adjustable from 2400 to 19200 baud (9600 is default). |
Classification | Based on Class 2 specifications from the MIL-PRF-28800F Handbook |
Altitude | Maximum operating and nonoperating altitude- 15000 ft. (4600 m) |
Hazardous Area Operation | Safe operation as defined by Class I Division 2 Group D as found in the National Fire Association Code (NFPA 70) Section 500 and tested |
Dimensions | US: 9.5L x 5.5 x 3.6 in. Metric: 215 x 165 x 92mm |